Assembly - LawnMaster M2EB1637M Instruction Manual

ASSEMBLY

Assembly Preparation
■ Carefully remove all contents from the product packaging.
■ Ensure you have all the accessories and tool(s) needed for assembly and operation. This also
includes suitable personal protective equipment.
WARNING
If any parts are damaged or missing do not operate this product until the parts are replaced.
Failure to pay attention to this warning could result in serious personal injury.
WARNING
Do not attempt to modify this product or create accessories not recommended for use with this
product. Any such alteration or modification is misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING
Do not connect to power supply until assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
WARNING
Never operate the mower without the proper safety devices in place and in correct working order.
Never operate the mower with damaged safety devices. Failure to pay attention to this warning
can result in serious personal injury. Make sure all packing is removed from product parts before
starting assembly.
Assembling the Lower Handle (See Fig. 1)
■ Unfold the lower handle and adjust to the desired operating position. There are three possible
positions (Fig. 1).
■ Rotate the wing knobs clockwise to tighten (Fig. 1).
Assembling the Upper Handle (See Fig. 2)
■ Align the upper handle and lower handle and secure with the wing knobs and bolts (Fig. 2).
■ There are two possible height positions. Choose the one most suitable to the operator's height.
■ Secure the control cable against the handle frame with the supplied cable clips.
14