Table of Contents
Advertisement
Power Supply
Power Supply
Charge the Battery Pack on the AC Adaptor
AC Adaptor
POWER Lamp
Charge Lamp
12
SD5000. p12-14.p65
1
Connect AC Cable (supplied) to AC
IN on the AC Adaptor and plug the
AC Adaptor into an AC outlet.
• POWER Lamp lights red.
• Disconnect DC Cable if it is
AC Cable
connected to AC Adaptor.
2
Attach the Battery as shown to
charge.
• Charge Lamp on the AC Adaptor
flashes green. When lamp stops
flashing, the Battery is fully charged.
(Takes approx. 1 hour 40 minutes.)
3
Remove the Battery.
Slide the Battery out and then lift up.
Battery Charging Confirmation Marker
Use this marker as a reminder to yourself
when the Battery is fully charged or in need
of a charge. This marker performs no
function and is for your reference only.
• The Battery is no longer serviceable if the
operation time is very short, even after a
sufficient charge.
For assistance, please call : 1-800-272-7033.
12
80/01/04, 11:37
Advertisement
Table of Contents
