Table of Contents
Advertisement
The Self-Timer allows you to capture an
image about 10 seconds after pressing
the shutter.
Note
• SELF TIMER is set to ON, the
RAPIDFIRE™ and TIME LAPSE functions
are automatically disabled and can not be
set to ON.
Before you begin
Set the POWER Switch to REC or
MANUAL REC. (See pages 18, 19.)
Press MENU to display the MENU
screen.
POWER Switch
1
Select Button
/ / /
2
MENU Button
Self-Timer Indicator
3
SHTR
(SHUTTER)
SD5000. p36-40.p65
Self Timer Recording
Self Timer Recording
1
Press
and press
This puts the camera in self-timer
mode.
[ REC Mode ]
• After ON is selected and MENU is
pressed,
LCD Viewfinder (see page 9).
2
Press MENU to exit.
3
Press SHTR.
• The Self-Timer Indicator lights up.
The indicator starts flashing rapidly
after about 8 seconds and the image
is captured about 2 seconds later.
• The Self-Timer setting returns to
OFF mode each time an image is
captured. Repeat these steps each
time Self-Timer is used.
39
or
to select SELF TIMER
or
to select ON.
[ MANUAL REC Mode ]
mark will appear on the
39
80/01/04, 11:40
Advertisement
Table of Contents
