Table of Contents
Advertisement
INSTALLATION OF THE FAUCET WATER
-
Check the faucet. Make sure the o-ring silicones are installed (see picture.1). Warning: Do not
install the faucet if either o-ring is missing.
-
Note: 2 spare o-ring silicones are provided inside the instruction manual package.
-
Align the faucet holes with the faucet adapter. Insert the faucet holes into the faucet adapter (see
picture.1).
-
Connect the faucet to the adapter by turning the faucet ring clockwise until firmly secured. (see
picture.2)
-
Check the bottom of the faucet to see if there is any leakage during operation. If a leakage is
detected, remove the faucet, check the o-rings and set it back again firmly.
6
Advertisement
Table of Contents
Need help?
Do you have a question about the Spigliato Series and is the answer not in the manual?