Subscribe to Our Youtube Channel
Related Manuals for Remii WM-55-XS
Summary of Contents for Remii WM-55-XS
- Page 1 INSTALLATIO ON AND OPERATION INSTRUCTIO ONS FOR WM-55-XS WM-65-XS INSTALLER: LE LEAVE THIS MANUAL WITH THE AP PPLIANCE. CONSUMER: RETAIN N THIS MANUAL FOR FUTURE RE EFERENCE.
-
Page 2: Table Of Contents
Please read and carefully follow all of the instruction found in this manual. Please pay special attention to the safety instructions provided in this manual. The instructions included here will assure that you have many years of dependable and enjoyable service from your Remii product. IMPORTANT INSTRUCTIONS ............................ -
Page 3: Important Instructions
IMPORTANT INSTRUCTIONS 1. Read all instructions before installing or using this heater. 2. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet from the front, sides and rear of the heater. 3. Always unplug heater when not in use. 4. - Page 4 knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- Page 5 Cautions Always install the heater in accordance with this guide. If in doubt obtain expert advice. Always make sure the electrical socket is accessible and located adjacent to, but not above the heater. Always disconnect the heater from the electrical supply before moving it, or Do’s carrying out cleaning, maintenance.
-
Page 6: Unpacking And Testing Appliance
UNPACKING AND TESTIN NG APPLIANCE Carefully remove the appliance f from the box. Prior to installing the appliance, t test to make sure the appliance operates properly by plugging the power supply cord into a 120 0 Volt grounded outlet. Test all aspects of its operation ( (manual switches, remote and heater) to make sure all... -
Page 7: Wm-55-Xs
WM-55-XS Description This appliance has been tested in accordance Built-in Appliance Voltage 120V AC 60Hz with the UL Standard 2021 for fixed and location dedicated electric room appliances in the United Watts 1500W Max States and Canada. If you need assistance... -
Page 8: Wm-65-Xs
WM-65-XS Description This appliance has been tested in accordance Built-in Appliance Voltage 120V AC 60Hz with the UL Standard 2021 for fixed and location dedicated electric room appliances in the United Watts 1500W Max States and Canada. If you need assistance NO HEATER during installation, please contact your local MOTOR HEATER... -
Page 9: Installation-Wall Mount
INSTALLATION-WALL MO MOUNT NOTE: Due to the many different materials used to build walls, it is highly recommended that you consult your local builder before you install this appliance on a wall. 1. Select a location that is not prone to moisture and is located at least 0.91 m or 3 feet away from combustible materials such as curtains or drapes, furniture, bedding, paper, etc. -
Page 10: Installation- Built-In
INSTALLATION- BUILT-IN NOTE: Due to the many differe ent materials used to build walls, it is high hly recommended that you consult your local builder b before you install this appliance on a wall. Preparation 1. Select a location that is not p prone to moisture and is located at least 0.9 .91m or 3 feet away from combustible materials s... - Page 11 2. Unscrew the 2 screws locat ted on each side and take off the inner sid de steel panels. screws inner side steel panels screws 3. Put the fireplace into the wa all opening and fix it to be the wall. Screw the appliance onto the wall.
- Page 12 4. Screw back the inner side s steel panel. Screw back the inner side panel that you removed at STEP 2. 5. Put back the front glass pan nel after you finish the media decoration.
-
Page 13: Hardwire Installation
HARDWIRE INSTALLAT TION Turn off the appliance complete ely and let cool before servicing. Only a q qualified service person should service and repa air this electric appliance. If it is necessary to hard-wire this appliance, a qualified electrician m must remove the cord connection, and wire the a appliance directly to the house hold wiring... - Page 14 3. Connect the uncovered wiring with 14 A WG wiring (not provided with the appliance) by a wiring connecting cap which you can find in the manual bag. Please make sure the live wire goes into the “L”, the neutral wire into “N” and the ground wire into “G”. 4.
-
Page 15: Media Options
MEDIA OPTIONS The WM-55-XS and WM-65-X XS are shipped with two mixture med dia shows below: the Canyon brown and Ocean blue e. Consumers may purchase optional de ecorative media if they choose. See dealer for more de etails. Ocean blue... -
Page 16: Operation
OPERATION The fireplace can be operated e either by the touch panel located on the l left front top side of the fireplace, or by supplied rem mote control. Plug the fireplace into a 15 Am mp wall socket. MANUAL OPERATION 1. -
Page 17: Remote Control Operation
REMOTE CONTROL OPERATION DISPLAY ON/OFF YELLOW ORANGE TRAY ON/OFF ADJUST FLASH HEATER ON/OFF HIGH TEMP. For remot e t o funct ion make sure t he heat er is plugged in and main power swit ch located on t he bott om left hand side is at posit ion I. - Page 18 7. Press “ADJUST”, rotate es through the 13 colors of tray lighting. 8. Press “FLASH”, the tray y light cycles through all 13 colors. 9. Press “HEATER ON/OF FF” once to turn on the heater, in H2 settin ng, 1500W, indicating “H2”...
-
Page 19: Installing Wall Thermostat
INSTALLING WALL THER RMOSTAT WALL THERMOSTAT WIRING G DIAGRAMS NOTE: The wall thermostat wil ll be functioning when the heater is on t t he TEMP. setting. Wire the wall thermostat prio or to installing the fireplace. WALL THERMOSTAT WIRING G (24 VAC) Install Wall Thermostat per in nstructions provided with kit and per th... -
Page 20: Replacement Parts
REPLACEMENT PARTS PART NUMBER DESCRIPTION WM-55-XS WM-65-XS 3238503 3240503 TRIM FRONT GLASS 3238507 3240507 ASSEMBLY 107022382 107022402 TRAY GLASS 107022381 107022401 BACK GLASS 601144 FLAME LED STRIP 10101225 FLAME MOTOR 3238505 3240505 FLICKER ASSEMBLY 601105F CIRCUIT BOARD RIGHT OUT SIDE... -
Page 21: Exploded View
EXPLODED VIEW... -
Page 22: Trouble Shooting
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Dim or no flame Flame LED’s are burnt out Inspect the LED’s and replace them if necessary Back black cloth is falling off Change a new flicker and back and roll the flicker black cloth Ember bed is not Ember LED’s are burnt out Inspect the ember bed LED’s and... -
Page 23: Service History
SERVICE HISTORY This heater must be serviced annually depending on usage. Date Dealer Service Technician Service Performed Special Concerns Name Name NOTES:...
Need help?
Do you have a question about the WM-55-XS and is the answer not in the manual?
Questions and answers