Table of Contents
Advertisement
Quick Links
INSTALLATION AND OPERATION INSTRUCTIONS FOR
102745-XT
102755-XT
102765-XT
SAFETY INFORMATION
WARNING
If the information in these instructions are
not followed exactly, a fire or explosion
may result causing property damage,
personal injury or loss of life.
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE.
CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Remii 102745-XT
Summary of Contents for Remii 102745-XT
- Page 1 INSTALLATION AND OPERATION INSTRUCTIONS FOR 102745-XT 102755-XT 102765-XT SAFETY INFORMATION WARNING If the information in these instructions are not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
-
Page 2: Table Of Contents
Please read and carefully follow all of the instruction found in this manual. Please pay special attention to the safety instructions provided in this manual. The instructions included here will assure that you have many years of dependable and enjoyable service from your Remii product. IMPORTANT INSTRUCTIONS............................3 UNPACKING AND TESTING APPLIANCE .......................4... -
Page 3: Important Instructions
IMPORTANT INSTRUCTIONS Read all instructions before installing or using this heater. 2. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet from the front of the heater; keep them away from sides and rear as well. 3. -
Page 4: Unpacking And Testing Appliance
UNPACKING AND TESTING APPLIANCE Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located 120 Volt grounded outlet. GROUNDING APPLIANCE This appliance is for use on 120 Volts. -
Page 5: 102745-Xt
102745-XT This appliance has been tested in Description Built-in Appliance accordance with the UL Standard 2021 Voltage 120V AC 60Hz for fixed and location dedicated electric Watts 1500W Max room appliances in the United States and NO HEATER Canada. If you need assistance during... -
Page 6: 102755-Xt
102755-XT This appliance has been tested in Model Number Built-in Appliance accordance with the UL Standard 2021 Voltage 120V AC 60Hz for fixed and location dedicated electric Watts 1500W Max room appliances in the United States and NO HEATER Canada. If you need assistance during MOTOR HEATER installation, please contact your local Appliance Width... -
Page 7: 102765-Xt
102765-XT Description Built-in Appliance This appliance has been tested in accordance with the UL Standard 2021 Voltage 120V AC 60Hz for fixed and location dedicated electric Watts 1500W Max room appliances in the United States and NO HEATER Canada. If you need assistance during MOTOR HEATER installation, please contact your local Appliance Width... -
Page 8: Safety Drill Screw Area
SAFETY DRILL SCREW AREA There is a safety drill screw area as show below. Please make sure that the fix screws are in this area. Sa fe ty d rill s cre w a re a (Da rk a re a ) T h e m a n u a l c o n tro l p a d p o s itio n HARD- WIRE INSTALLATION Turn off the appliance completely and let cool before servicing. -
Page 9: For Bathroom Use
2. Attach the wiring to the junction block. Please make sure the live wire goes into the “L”, the neutral wire into “N” and the ground wire into “G”. 3. Put the plate back and screw back. FOR BATHROOM USE If this unit is installed in a bathroom it must be protected by a GIF receptacle or circuit. -
Page 10: Outdoor Installations
OUTDOOR INSTALLATIONS OUTDOOR INSTALLATIONS For All TRU VIEW, SYMMETRY, PANORAMA, TRADITIONAL models For all TRU-VIEW-XL, BI-DEEP , & BI-SLIM Models TRU-VIEW-XL, BI-DEEP & BI-SLIM electric fireplaces are suitable for installa�on in outdoor areas Our TRU VIEW,PANORAMA, SYMMETRY and TRADITIONAL electric fireplaces are suitable for protected from direct water impingement. -
Page 11: Installation
INSTALLATION The 102745-XT, 102755-XT and 102765-XT models are designed to be built-in. These units allow for the finishing material (drywall, stone, tile, etc) to be built right down to the glass edge. However, that application is not always desirable or available so the surround could be used as an alternate finish option. - Page 12 2. Remove the framing plates from the unit framing plate 3. Re-fix the framing plates to the unit as the picture shows framing plate...
- Page 13 4. Bend up the framing plates. 5. Put the unit into the opening.
- Page 14 6. Drive the mounting screws into the framing plates on the unit and the wall studs. framing plate 7. After checking that the fireplace operates properly, cover the glass panel with protective plastic bag and install plywood or drywall. IMPORTANT NOTE: IF YOU WANT TO USE THE SUPPLIED SURROUND the thickness of the wall finish can only be 1”.
- Page 15 8. Decorate the plywood or drywall with glazed tile, wallpaper, etc. Fireplace 9. Put back the trim that you’ve removed from the unit at STEP 1. trim...
-
Page 16: Media Options
Media Options The 102745-XT, 102755-XT and 102765-XT are shipped with two mixture media shows below: the Canyon brown and Ocean blue. Consumers may purchase optional decorative media if they choose. See dealer for more details. Canyon brown Ocean blue FIRE GLASS MEDIA-LOG INSTALLATION 1. - Page 17 2. Install the fire glass media. Pour the fire glass media into the try. Feel free to use any combination of fire glass media that you find most appealing. 3. Put back the front glass after you finish the fire glass decoration.
-
Page 18: Operation
OPERATION The fireplace can be operated either by the switches located on the left bottom of the fireplace unit or by supplied remote control. Plug the fireplace into a 15 Amp wall socket. MANUAL OPERATION 1. The main power ON/OFF switch in position O, the fireplace is OFF. 2. - Page 19 REMOTE CONTROL OPERATION For remote to function make sure the heater is plugged in and main power switch located on the bottom left hand side is at position I. When operating the remote make sure you point the remote to the centre of the fireplace and make sure each time you press the button the buzzer inside the unit will beep once.
-
Page 20: Installing Wall Thermostat
INSTALLING WALL THERMOSTAT WALL THERMOSTAT WIRING DIAGRAMS Wire the wall thermostat prior to installing the fireplace. WALL THERMOSTAT WIRING(24 VAC) Install Wall Thermostat per instructions provided with kit and per the following information: 1. Turn off circuit breaker. 2. Remove cover plate located on the left side of appliance. Pull the wire out and cut the inside thermostat. -
Page 21: Replacement Parts
REPLACEMENT PARTS This list contains replacement parts QTY. DESCRIPTION 102745-XT 102755-XT 102765-XT 602030C 602030C 602030C BLOWER AND HEATER ASSEMBLY FIREPLACE BOX 10104010 SWITCH 601036 CONTROL PANEL 601092C CIRCUIT BOARD 10101225 FLAME MOTOR 3134504 3136504 3138504 FLICKER ASSEMBLY 601136B 4/6/8 LED STRIP... -
Page 22: Exploded View
EXPLODED VIEW... -
Page 23: Trouble Shooting
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Dim or no flame Flame LED’s are burnt out Inspect the LED’s and replace them if necessary. Ember Ember LED’s are burnt out Inspect the ember bed LED’s and glowing or dimming replace them if necessary. Appliance turns off and Appliance has overheated and Turn off the main switch, allow... -
Page 24: Service History
SERVICE HISTORY This heater must be serviced annually depending on usage. Date Dealer Service technician Service Performed Special Concerns Name Name NOTES:...
Need help?
Do you have a question about the 102745-XT and is the answer not in the manual?
Questions and answers