When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: Description Sketch Description Sketch Back Seat frame Front leg Wood seat (L-R) Side Center stretcher stretcher (L-R) ITEM NO.: C-219 Printed in Vietnam REVISED JUL 2, 2012 - 2 -...
Note: DO NOT fully tighten any of the bolts, until the chair is assembled, then put on a flat level surface to make sure the chair is level and then tighten the bolts. ITEM NO.: C-219 Printed in Vietnam REVISED JUL 2, 2012...
Page 4
Attach Front Legs (D) to the seat frame with bolts (2), and Washers (3) and (4). Tighten with Allen Key (5). Place Side Stretchers (E) (from step 2) between front and back legs, use the screwdriver to tighten the screws (6) as shown below. ITEM NO.: C-219 Printed in Vietnam REVISED JUL 2, 2012 - 4 -...
Page 5
STEP 4 Attach the Seat (C) to top of the seat frame (from Step 3) by using Screws (6) tighten with a screw driver. ITEM NO.: C-219 Printed in Vietnam REVISED JUL 2, 2012 - 5 -...