Temperature Control Dial; Shelves; Temperature Controls - GE TOP-FREEZER 16 Owner's Manual And Installation Instructions

General electric refrigerator user manual
Hide thumbs Also See for TOP-FREEZER 16:
Table of Contents

Advertisement

About the temperature control dial.
Turning the dial to 0/ Off stops cooling in both compartments—fresh food and freezer. It does not shut off power to the refrigerator.
About the fresh food compartment shelves.
Shelf supports at various levels allow you to custom-space your shelves. Not all features are on all models.
2 Lift up and out
1 Tilt up
Lift rear
Pull forward
To remove the full-width shelves

Temperature Control Dial

The temperature control dial has nine settings plus 0. 1 is the warmest. 9 is the coldest. At first,
set the dial at 5.
After using the refrigerator, adjust the dial if necessary. Insert a coin into the slot in the middle
of the dial and you can turn the dial to the setting that is best suited to your needs.
Allow 24 hours for the refrigerator to get cold.
Temperature Control Dial
The temperature control dial adjust refrigerator from warmest to coldest.
The recommended factory setting is shown in illustration to the left. For colder
temperature turn dial clockwise toward snowflake. For warmer temperature turn
dial counter clockwise away from snowflake. allow 24 hours for adjustment.
Half-Width Shelves
One end of the shelf rests on a molded side-
wall support; a bracket on the other end hooks
into a track on the rear cabinet wall.
To remove, lift the shelf up at front, then off
the support and out of the track.
To replace, select desired shelf height. With
shelf front raised slightly, hook the bracket's top
lug into the track, then lower the shelf onto the
support.
Full-Width Shelves
Some models have a steel wire sliding shelf, a
stationary tempered glass shelf,
a spillproof shelf or two steel wire stationary
shelves. These shelves can be moved to
another place in the fresh food
compartment.
The full-width sliding shelf has stop-locks.
When placed correctly on the shelf supports,
the shelf will stop before coming completely
out of the refrigerator and will not tilt when
you place food on it or remove food from it.
Spillproof Shelves
(on some models)
Spillproof shelves have special edges
to help prevent spills from dripping
to lower shelves. To remove or replace
the shelves, see the above instructions.
(on some models)
(on some models)
NOTE: The shelf to the right of the track is designed
to hook into the right-hand slot; the shelf to the left
is designed to hook into the left-hand slot.
To remove a full-width shelf when
the fresh food compartment door
cannot be opened fully
GEAppliances.com
Lift rear
Pull forward and down
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents