Gripper; Clamp - Denios Secu Ex Operating Instructions Manual

Attachments
Product description & specification
3.2.2

Gripper

Fig. 30: Gripper
The gripper attachment is used to grip and hold drums at the upper edge of the drum (rim). The clamping hook and
counter supports are movable and independent of each other. The greater the force on the counter support, the more
tightly the clamping hook grips.
To stabilise the drum which is being held, the gripper attachment has a drum support which supports the drum near the
bottom.
The gripper is remarkably easy to use. The whole grip - lift - lower - release operation is carried out by pressing your foot
on the foot lever and then on the pedal on the chassis.
The gripper is suitable for the following drums:
212 – 230 litre steel ribbed drum in accordance with DIN EN 15750-2
g
208 - 216.5 l litre steel lidded drum in accordance with DIN EN 15750-1
g
60 litre steel ribbed drum
g
3.2.3

Clamp

Fig. 31: Clamp
The clamp attachment consists of two adjustable gripper jaws, which clamp round the drum. Each gripper jaw has an ad-
justing screw with lock washer to ensure the drum is firmly held.
50 / 144 241109_Secu-Ex_004_INT