To Load And Play Discs - GE DGE100N User Manual

IB/100N/GE/4_9 4/12/02 10:17 AM
To Load and Play a DVD Disc
Turn on the TV and your DVD Player (press ON•OFF on the remote or press the STANDBY/ON
button on the front of the DVD Player).
1. If necessary, tune the TV to its Video Input channel (if you need more information, go to page
59).
This is an example of a
one-sided disc.
2. Press and hold the OPEN•CLOSE button (the disc tray opens).
3. Place a disc gently into the tray with the disc's label facing up (double-sided discs have content
on both sides, so you can place either side up).
4. Press the OPEN•CLOSE or PLAY button. The disc tray closes. The DVD Player reads the disc's
table of contents, and then one of three things happens depending on how the disc was
programmed:
• The disc starts playing.
This is an example of a
two-sided disc — the title
• The disc menu appears on the screen. One of the options will start disc play. Highlight that
is usually in the center of
option and press OK.
the disc.
• The DVD Player's main menu appears on the screen. Highlight the Play option and press OK.
When you stop playing a disc, the player remembers where you stopped. When you start playing the
disc again, the DVD Player picks up where you left off unless the disc is removed or the player is
unplugged, or if you press the STOP button twice.
Graphics contained within this publication are for representation only. Your unit might differ slightly.
Page 15
Chapter 3: Playing Discs (DVDs)
15