Connection: Dvd + Tv + Vcr - GE DGE100N User Manual

IB/100N/GE/4_9 4/12/02 10:17 AM
Chapter 1: Setup and Connections
Back of TV (example)
S-VIDEO
AUDIO
VIDEO L R
1
– or –
2a
AUDIO
OUT
DIGITAL AUDIO OUT
VIDEO
R
OUT S-VIDEO
L
Back of DVD Player
AUDIO
VIDEO
L R
IN FROM ANTENNA
Back of VCR (example)
The back of your TV and VCR might look differently than
the ones pictured here.
Note: Don't connect the DVD player to the VCR, or through the
VCR. Doing so could negatively affect the picture quality and/or
disable the DVD player.
4
Graphics contained within this publication are for representation only. Your unit might differ slightly.
Page 4
Connection: TV + DVD + VCR
1. Connect the audio cables to the AUDIO OUT L (left – white) and R
CABLE/ANTENNA
(right – red) jacks on the back of your DVD Player, and to the
4
corresponding Audio Input jacks on your TV (sometimes labeled
AUDIO IN L and R).
2b
2. Connect the video cable.
a. Basic video connection – Connect the video cable (yellow) to the
VIDEO OUT jack on the back of your DVD Player, and to the Video
Input jack on your TV (sometimes labeled VIDEO IN).
b. S-Video (optional) – If your TV has an S-Video jack, connect the
S-Video cable (not provided) to the S-VIDEO OUT jack on the back
4
of your DVD Player and to the S-VIDEO jack on your TV.
OUT TO TV
3. Connect the antenna or cable to the Antenna Input jack on the VCR
CABLE
(sometimes labeled IN FROM ANTENNA).
OR
OFF-AIR SIGNAL
4. Connect a coaxial cable to the Antenna Output jack on the VCR
3
(OUT TO TV) and to the Antenna Input jack (CABLE/ANTENNA)
on the TV.
5. Insert the AC power cord into an AC outlet.
Go to page 8