GE DGE100N User Manual page 9

IB/100N/GE/4_9 4/12/02 10:17 AM
DVD Player + TV + Audio Receiver
1. Connect the left and right audio cables to your audio/video receiver and to the AUDIO OUT L
(left – white) and R (right – red) jacks on the back of your DVD Player.
2. If you have a Dolby Digital or DTS receiver with a Digital Audio Input jack, use the DIGITAL
AUDIO OUT jack to connect the receiver to the DVD player. You must change the setting in the
Sound menu (go to page 42).
Note: To finish connecting your receiver, go to the manual that was packed with it.
3. Connect the video cable.
a.
back of your DVD Player, and to the Video Input jack on your TV (sometimes labeled
VIDEO IN).
b.
S-VIDEO OUT jack on the back of your DVD Player and to the S-VIDEO jack on your TV.
4. Connect the AC power cord into an AC outlet.
Page 7
Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the
S-Video (optional) – If your TV has an S-Video jack, connect the S-Video cable to the
Chapter 1: Setup and Connections
Go to page 8
7