Activate A Stored Flight Plan; Activate A Flight Plan Leg - Garmin SOCATA TBM850 Cockpit Reference Manual

gps navigation
7) Turn the small FMS Knob to enter the desired altitude.
8) Press the ENT Key. If the waypoint entered is an airport, the option to
select MSL or AGL is now displayed. If the waypoint is not an airport,
proceed to step 10.
9) Turn the small FMS Knob to select 'MSL' or 'AGL'.
10) Press the ENT Key. The cursor is placed in the 'OFFSET' field.
11) Turn the small FMS Knob to enter the desired target altitude offset from
the selected Direct-to.
12) Press the ENT Key to highlight 'Activate?' or turn the large FMS Knob to
highlight the 'CRS' field.
13) Turn the small FMS Knob to enter the desired course to the waypoint.
14) Press the ENT Key to highlight 'ACTIVATE?'.
15) Press the ENT Key again to activate the Direct-to.

ACtivAte A stored Flight plAn

1) Press the FPL Key and turn the small FMS Knob to display the Flight Plan
Catalog Page.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired flight plan
4) Select the ACTIVE Softkey. The confirmation window is now displayed.
5) With 'OK' highlighted, press the ENT Key to activate the flight plan. To cancel
the flight plan activation, turn the large FMS Knob to highlight 'CANCEL' and
press the ENT Key.

ACtivAte A Flight plAn leg

1) From the Active Flight Plan Page, press the FMS Knob to activate the cursor
and turn the large FMS Knob to highlight the desired waypoint.
2) Select the ACT LEG Softkey.
OR
Press the MENU Key, select the 'Activate Leg' option from the page menu
and press the ENT Key. This step must be used when activating a leg from
the PFD.
3) With 'Activate' highlighted, press the ENT Key.
20
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
190-00708-02 Rev. A