Configuring A Certificate For Ieee802.1X; Solving Problems For Advanced Security; Restoring The Security Settings - Epson DS-790WN Administrator's Manual

Advanced Security Settings
Items
Encryption Strength

Configuring a Certificate for IEEE802.1X

Configure the Client Certificate for IEEE802.1X. When you set it, you can use EAP-TLS and PEAP-TLS as an
authentication method of IEEE802.1x. If you want to configure the certification authority certificate, go to CA
Certificate.
1. Access Web Config and then select the Network Security tab > IEEE802.1X > Client Certificate.
2. Enter a certificate in the Client Certificate.
If you have already imported a certificate published by a Certification Authority, you can copy the certificate
and use it in IEEE802.1X. To copy, select the certificate from Copy From, and then click Copy.
Related Information
"Running Web Config on a Web Browser" on page 34
&

Solving Problems for Advanced Security

Restoring the Security Settings

When you establish a highly secure environment such as IPsec/IP Filtering, you may not be able to communicate
with devices because of incorrect settings or trouble with the device or server. In this case, restore the security
settings in order to make settings for the device again or to allow you temporary use.
Disabling the Security Function Using Web Config
You can disable IPsec/IP Filtering using Web Config.
1. Access Web Config and select the Network Security tab > IPsec/IP Filtering > Basic.
2. Disable the IPsec/IP Filtering.
>

Solving Problems for Advanced Security

You can select one of the followings.
High
Middle
113
>
Restoring the Security Settings
Settings and Explanation
AES256/3DES
AES256/3DES/AES128/RC4