Attaching The Holder - OML LINQ 1.0 User Instruction Manual

Attaching the Holder

1. Ensure that the OML LINQ
Holder.
2. Push the OML LINQ
click into place into the slots on the side of the device.
Arms
Slots
The Holder allows the OML LINQ
a shoe or sock. Ensure that it is securely attached before use!
When removing the Holder from the shoe be careful not to over
bend the clip. Slide the Holder upwards, off the rim of the shoe.
The OML LINQ
in a sock.
6
into the Holder ensuring that both arms
TM
can be used without the Holder and placed directly
TM
is positioned correctly in the
TM
to be attached to the side of
TM