Miscellaneous - OML LINQ 1.0 User Instruction Manual

Miscellaneous

Activity and Inactivity Detection
To save battery power the OML LINQ
when no activity is detected for 5 minutes or more. The device is
woken up by any small motion of the OML LINQ
the Wired Footswitch. If no movement occurs before pressing the
pause on the stimulator to begin walking, the OML LINQ
be detected by the stimulator. If this occurs a small movement of the
foot or force on the Wired Footswitch will wake up the OML LINQ
Turning off the OML LINQ
There is no off switch on the OML LINQ
low power state if it is not being used but if it is not to be used for an
extended period (i.e. 1 month), then remove the coin cell battery.
Close Proximity Joining
Close proximity joining is used if many devices are being joined at
the same time in a confined space (e.g. a clinical area). If a Wired
Footswitch is inserted and pressed down at the same time that the
joining button is pressed then close proximity joining will start. This is
indicated with the blue light flashing quickly. The two devices should
be positioned touching each other for joining to be successful.
Transportation
Odstock Medical Limited recommend transporting the OML LINQ
without a battery installed to turn off wireless communication (e.g.
on an aircraft). In this case use the stimulator in Wired Footswitch
mode. Warning: Please check with local authorities/regulations
on the requirements for transportation of lithium batteries.
14
goes into a sleep mode
TM
TM
. The device will enter a
TM
or by pressing
TM
may not
TM
.
TM
TM