Table of Contents
Advertisement
Electromagnetic Compliance
The OML LINQ™ is intended for use in an electromagnetic
environment in which radiated RF disturbances are controlled.
The customer or the user of the OML LINQ™ can help prevent
electromagnetic interference by maintaining a minimum
distance between portable and mobile RF communications
equipment
recommended below, according to the maximum output power
of the communications equipment.
Rated
maximum
output
power of
transmitter
(W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance in metres (m) can be estimated using the equation applicable to the
frequency of the transmitter where is the maximum output power rating of the transmitter
in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range
applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
(transmitters)
Separation distance according to frequency of
150 kHz to 80
MHz
d = 1.2 * √P
0.12
0.38
1.20
3.79
12.0
and
the
OML
transmitter (m)
80 MHz to
800 MHz
d = 1.2 * √P
0.12
0.38
1.20
3.79
12.0
LINQ™
as
800MHz to
2.5GHz
d = 2.3 * √P
0.23
0.73
2.30
7.27
23.0
25
Advertisement
Table of Contents
