If any available, you can also edit or delete the timers on this list. Highlight the timer of your choice and press
OK. Edit and Delete options will appear at the bottom of the screen. Highlight the desired option and press OK.
After you edited a Timer you can choose either to replace it or add it as a new Timer. If you choose the Replace
option, the Timer will be saved with the new settings. If you choose the Add option, the timer will be added to
the list as a new timer. Highlight Replace or Add according to your preference and press OK to proceed. When
you choose to delete a timer a confirmation dialogue will be displayed on the screen. Highlight Yes and press
OK to delete the selected timer.
A warning message will be displayed if the time intervals of two Timers overlap. You cannot set more than one
Timer for the same time interval.
Press EXIT button to close the Schedule List.
16. HDMI-CEC function
With CEC function of your TV you can operate a connected device with the TV remote control. This function uses
HDMI CEC (Consumer Electronics Control) to communicate with the connected devices. Devices must support
HDMI CEC and must be connected with an HDMI connection.
The TV comes with the CEC function switched on. Make sure that all CEC settings are properly set up on the
connected CEC device. The CEC functionality has different names on different brands. CEC function might not
work with all devices. If you connect a device with HDMI CEC support to your TV, the related HDMI input source
will be renamed with the connected device's name.
To operate the connected CEC device, select the related HDMI input source from the Inputs menu on the Home
Screen. Or press the Source button if the TV is in Live TV mode and select the related HDMI input source from
the list. To terminate this operation and control the TV via the remote again, press the Source button, which will
still be functional, on the remote and switch to another source.
The TV remote is automatically able to control the device once the connected HDMI source has been selected.
However not all buttons will be forwarded to the device. Only devices that support CEC Remote Control function
will respond to the TV remote control.
The TV also supports ARC (Audio Return Channel) feature. This feature is an audio link meant to replace other
cables between the TV and the audio system (A/V receiver or speaker system). Connect the audio system to the
HDMI2 input on the TV to enable ARC feature.
In order to activate ARC feature the Speakers option should be set as External Audio System. You can access
this option from the menu "TV options > Settings > Device Preferences > Sound" in Live TV mode or from
"Settings > Device Preferences > Sound" menu on the Home Screen. When ARC is active, TV will mute its other
audio outputs automatically. So you will hear audio from connected audio device only. The volume control
buttons of the remote will be directed to connected audio device and you will be able to control the volume of
the connected device with your TV remote.
Note: ARC is supported only via the HDMI2 input.
The CEC functions are set to On by default. To switch off completely do the following:
1 - Enter the "Settings > Device Preferences > Inputs" Menu on the Home Screen or menu "TV options > Settings
> Device Preferences > Inputs" in Live TV mode.
2 - Scroll down to Consumer Electronic Control (CEC) section. Highlight HDMI control option and press OK.
36