Programming Specific Function - Furuno CSH-5L/CSH-8L Operator's Manual

7. Use the [GAIN] control to choose the function key (F1-F4) you want to
program.
8. Press the [EVENT] key to program the function key selected at step 7.
9. Press the [MENU] key to close the menu.
Useful programs (main items only)
For detecting surface fish
TX OUTPUT
PULSE LENGTH
TX CYCLE
TVG NEAR
TVG FAR
HOR
BEAMWIDTH
VER
BEAMWIDTH
COLOR CURVE
COLOR
RESPONSE
3.8.3

Programming specific function

You may program a function key with a menu item from the SONAR or
SOUNDER menu to use as shortcut. Most items are available except
TRANSMISSION, ASSIGN SETTING and ASSIGN MENU from the SONAR
menu and DRAFT from the SOUNDER menu. Locked items (shown in red) are
available however the message which asks if you are sure to change a setting is
not displayed when the corresponding function key is operated.
1. Press the [MENU] key to open the menu.
2. Use the [RANGE] control to choose [MENU MODE].
3. Use the [GAIN] control to choose SONAR or SOUNDER as appropriate.
4. Use the [RANGE] control to choose item.
5. Press appropriate function key until the message "COMPLETED" appears
(more than three seconds).
6. Press the [MENU] key to close the menu.
For detecting bottom fish
8
TX OUTPUT
7
PULSE LENGTH
10
TX CYCLE
5
TVG NEAR
5
TVG FAR
Narrow
HOR
BEAMWIDTH
Narrow
VER
BEAMWIDTH
1
COLOR CURVE
3
COLOR
RESPONSE
3. ADVANCED SONAR OPERATION
For detecting midwater fish
7
TX OUTPUT
5
PULSE LENGTH
10
TX CYCLE
5
TVG NEAR
6
TVG FAR
Narrow
HOR
BEAMWIDTH
Wide
VER
BEAMWIDTH
4
COLOR CURVE
1
COLOR
RESPONSE
8
8
10
6
7
Narrow
Wide
3
3
3-11