Furuno CSH-5L/CSH-8L Operator's Manual page 70

7. MENU DESCRIPTION
Description of SYSTEM menu (con't from previous page)
Item
AUTO RETRACT
SPEED MESSAGE
EXT KP SYNC
AUTO TRAIN SPD
AUTO TILT SPD
UNIT
SHIP'S SPD/BR
LOG PULSE
PORT1 BAUD
RATE
PORT1 FORMAT
PORT2 BAUD
RATE
PORT2 FORMAT
NAV DATA
COMBI SCALE
SUB TEXT INDI
LANGUAGE
TEST
SET TO DEFAULT
7-4
Turns automatic transducer retraction on/off and sets
speed (5-16) at which retraction occurs. This function
requires speed data.
The transducer may be retracted at a speed different from
set here if the speed data is wrong. Reduce the ship's
speed below 16 knots and then retract the transducer.
Turns on/off ship's speed warning message.
Turn on when using external keying pulse.
Chooses scanning speed of bearing mark; high or low.
High speed is useful for general searching and tracking
fast moving fish schools.
Chooses the speed of tilt change in automatic tilting from
high or low.
Chooses unit of depth and distance measurement among
meters, feet, fathoms, passi/braza.
Note: The unit of measurement is fixed for some menu
items (for example, draft). When the unit is changed,
echosounder range and shift are reset to 0 (zero).
Chooses source of speed and course data with which to
draw ship's track. The choices are log/gyrocompass,
current indicator, nav data and gyro+nav data.
Chooses log pulse/mile specification of speed log; 200 or
400 pulses/mile.
Sets baud rate of equipment connected to port 1, among
2400, 4800, 9600 and 19200 (bps).
Sets format of equipment connected to port 1; NMEA or
CIF (Furuno).
Sets baud rate of equipment connected to port 2, among
2400, 4800, 9600 and 19200 (bps).
Sets format of equipment connected to port 2; NMEA or
CIF (Furuno).
Chooses source of nav data among GPS, LC (Loran C),
DR (Dead Reckoning) or ALL. "ALL" automatically chooses
source in the order of GPS, Loran C and dead reckoning.
Chooses the location of the depth scale and distance scale
in the combination displays, right or left side.
For use by service technicians. Normally turn this
indication off.
Choose the language to display among English, Japanese,
Korean and several European languages.
Chooses the test to execute.
Restores all default settings, including controls. Choose
this item and then press the [EVENT] key to restore all
default settings.
Description Ref. Page.
—
8-6
—
—
—
—
—
—
—
—
—
—
—
5-6
—
—
8-6
—