Suppressing Effects Of Pitching And Rolling (Stabilizer) - Furuno CSH-5L/CSH-8L Operator's Manual

3.9 Suppressing Effects of Pitching and Rolling
(Stabilizer)
The Motion Sensor MS-100 (option) compensates for the affects of pitching and
rolling to provide steady, non-fading pictures, along the bearing selected. Follow
the procedure below to use the stabilizer feature.
1. Operate the trackball to place the trackball mark on the bearing where you
want the stabilizer the picture.
2. Press the [STABILIZER] key. The stabilizer mark, a dashed line extending
from the screen center to the edge of the effective diameter of the sonar
display, appears on the bearing selected and "STAB" appears at the top right
corner of the sonar display.
Note: If the target lock function is active when the stabilizer is turned on, the
How the stabilizer works
Stabilizer mark
stabilizer works on the bearing selected for the target lock feature
(target lock function has higher priority) and the stabilizer mark is not
displayed. Even when target lock is deactivated the stabilizer operates
on the bearing selected for target lock.
3. ADVANCED SONAR OPERATION
3-13