8.6.
Traverse Gear
<Precautions in reassembling the traverse block>
lTake the following precautions when reassembling the
traverse block.
1. Turn traverse gear on the traverse block to let trigger
lever turn rightward. (Front view)
2. Bring cam gear lever to the lever adjusting position at
the end of mechanical chassis unit.
3. Put tabs A and B into slots A and B respectively.
Place tabs C into hooks to mount the traverse block on
mechanical chassis unit. (Slot A... Mechanical chassis
unit, Slot B... Cam gear)
All manuals and user guides at all-guides.com
27
1. Disengage the tabs from the traverse gear.
2. Remove the traverse gear B.
NV-VP60GL / NV-VP60GC / NV-VP60GCS