Advertisement
Quick Links
Installation
manuel
towel warmer
OD-1010
Model
SPECIFICATION
Voltage: AC120V
Rated power: 100 W (OD-1010-SS, OD-1010-BR) 135 W (OD-1010-MB)
Unit size: 870 X 530 mm
This towel warmer is intended for the use in bathrooms or laundry areas.
Read the instructions carefully before operating.
1
4
Please read the wall-mounted instal-
lation carefully to understand how to
install on your ideal location of the
wall.
Please use the services of a certified
electrician for the apparent wireless
installation of this product.
Make sure to complete the installa-
tion before using it.
Frequency: 60Hz
3+1
4
84.00 mm
115.00 mm
Plug the power cord into an electrical
outlet for the apparent wire installa-
tion.
Switch ON/OFF : Press button ON/
C:\dessin classé compagnie\Odass\square tube.asm
OFF, product will start to work, if you
want to stop it, press the button
again.
70.00 mm
wire hole
3+1
4
4
67.00 mm
bolt hole
TOLERANCES
SAUF CONTRE INDICATION, LES
DIMENSIONS SONT EN POUCES.
FINI DE SURFACE :
PROJECTION :
Hardwire installation
1.60 mm
1
The timer can be adjusted to 2 h
(hour) or 4 h (hour). Press the button
Asn Machinerie inc
CE DOCUMENT EST LA
82 St-Joseph Sud
Asn
PROPRIÉTÉ DE
Rivière-Bleue qc
Machinerie inc
IL NE DOIT
Canada G0L-2B0
PAS ÊTRE DÉVOILÉ, UTILISÉ
tel:418-893-5844
fax:418-893-2858
OU REPRODUIT EN TOUT OU
EN PARTIES SANS
cell:418-714-1829
to select the right time.
L'AUTORISATION ÉCRITE DE .
alain@asnmachinerie.com
Asn Machinerie inc
www.asnmachinerie.com
1/X
± 1/16"
NOM
± .01"
square tube ASM.dft
.XX
.XXX
± .003"
DESSINÉ PAR
± .0005"
DATE DESSINÉE
.XXXX
02-03-2020
Client
ANGLE
± 1°
CLIENT
125
Please turn it off and take the plug
emplacement
PAGE
ÉCHELLE
REV
1 de 1
N/A
out from the outlet if you are not
using it.
2
1
Advertisement
Related Manuals for odass OD-1010
Summary of Contents for odass OD-1010
- Page 1 Model SPECIFICATION Voltage: AC120V Frequency: 60Hz Rated power: 100 W (OD-1010-SS, OD-1010-BR) 135 W (OD-1010-MB) Unit size: 870 X 530 mm This towel warmer is intended for the use in bathrooms or laundry areas. Read the instructions carefully before operating.
- Page 2 Plug-in installation instruction 1. Rivet the base onto the nut 2. Identify the location of the with fixing screw. holes needed for the screws on the wall. 3. Drill holes in the wall. 4. Insert screw anchor into the holes. 5.
- Page 3 Hardwire installation instruction 1. Rivet the base onto the nut 2. Identify the location of the with fixing screw. holes needed for the screws on the wall. 3. Drill holes in the wall. 4. Insert screw anchor into the holes. 5.
- Page 4 9. Connect the supply cable to the 10. Rivet the puller bolt 11. Press the button to turn it on junction box and aim the plate with the fixed stopper through or off, select on the timer in the junction box. allen key.
-
Page 5: Important Safeguards
LIMITED WARRANTIES sentation or warranty other than those contained the owner/end-user, contractor or builder.Odass Odass warrants the product to be free from defects in the warranty; any affirmation, repre-sentation or warrants for a period of 10 years, shower doors to in workmanship from the date of purchase.