Advertisement
Towel warmer
instruction
manual
Model OD-0810
SPECIFICATION
Voltage: AC 120V Frequency: 60 Hz
Rated power: 180 W (OD-0810-SS/BR) | 240 W (OD-0810-MB/MW)
This towel warmer is intended for bathroom. Read the instructions carefully
before using.
1
4
*The part is not in the installation boxes. It is already in place on the towel warmer.
Please use the services of a certified
electrician for the hardwire
installation of this product.
Plug the power cord into an electrical
outlet for product testing before
using.
For the apparent wire installation of
this product, please verify that the
jonction box gives 120 V.
3+1
4
3+1
*
The drying temperature can be set
between 30° and 60 degrees Celsius
(86 to 140 °F).
The timer can be set between 1 hours
to 8 hours. Touch the screen to
select the duration of the drying.
4
4
*
Hardwire installation
1
2
The towel warmer must not work
without being tented. Please turn it
off and take the plug
out from the outlet if it is not being
use.
1
Advertisement
Table of Contents
Related Manuals for odass OD-0810
Summary of Contents for odass OD-0810
- Page 1 Model OD-0810 SPECIFICATION Voltage: AC 120V Frequency: 60 Hz Rated power: 180 W (OD-0810-SS/BR) | 240 W (OD-0810-MB/MW) This towel warmer is intended for bathroom. Read the instructions carefully before using. Hardwire installation *The part is not in the installation boxes. It is already in place on the towel warmer.
- Page 2 Plug-in installation instructions 1. Slide the tray into the upper tubes and secure it with the screws. 2. Identify the location of the holes needed to screw the product on the wall. 4. Install stopper with 3. Drill holes in the wall. screw on the wall.
- Page 3 7. The supply cable must exit at 8. Press the button to turn the device the back part of the product. ON or OFF. Select the drying temperature between 30° and 60 degrees Celsius (86 to 140 °F). Hardwire Select the drying time from 1 hour to 8 hours.
- Page 4 5. Cut the supply cable. Make sure 6. Remove the tube already present you keep enough wire to go on the towel warmer and replace it through the tube and to plug into with the tube available in the box the junction box.
- Page 5 Odass warrants for a period of 5 years, sa- transferred to a third party and additional installation fees. Odass cannot be held responsible nitary porcelain products (toilet, lavatorie basins) limitations apply for commercial use.
Need help?
Do you have a question about the OD-0810 and is the answer not in the manual?
Questions and answers