Vax MACH5 Instruction Manual page 11

Remove dirt container as described above. Twist filter
assembly counterclockwise. Remove assembly from dirt
container (Fig.5/6).
A
Fig.5/6
Dirt and debris can be cleaned from the filter assembly by
brushing with the cleaner's combination tool.
Place the filter assembly on the dirt cup, aligning tabs (A)
on either side of filter with slots on dirt cup (B) and twist
it clockwise to secure into position.
Press dirt cup door release button (C) to latch dirt cup
door closed (Fig.5/7).
Fig.5/7
Replace dirt cup as described above.
Cleaning the Secondary Filter
IMPORTANT: Disconnect cleaner from electrical
!
outlet. Do not operate cleaner without dirt cup
or filters in place.
Remove dirt cup as previously described.
With thumb, slide latch (A) located at the top of the
housing to the right and pull down to remove gray filter
frame. Remove black foam filter. Rinse filter frame
cartridge and foam filter under cold water.
Allow both filter frame and filter to air dry for 24 hours
before replacing filter into filter frame. Reposition filter
frame cartridge by inserting tabs (B) into slots on back of
housing. Rotate filter cartridge frame up toward top of
housing and snap closed. top of dirt cup cavity and snap
closed (Fig.5/8).
All manuals and user guides at all-guides.com
A
B
C
A
Fig.5/8
Cleaning the HEPA Final Filter
IMPORTANT: Disconnect cleaner from electrical
!
outlet. Do not operate cleaner without dirt cup
or filters in place.
Remove dirt cup as previously described.
With fingers in slots, pull filter frame (A) straight out. Dirt
and debris can be cleaned from the filter cartridge by
brushing with the cleaner's combination tool (Fig.5/9).
A
Fig.5/9
NOTE: Filter cartridge can also be washed by rinsing
under cold running water.
Slide back into position on cleaner.
dirt container and filters
Vax Careline 0870 606 1248
B
B
11