Wiring - Furuno 1715 Operator's Manual

3. INSTALLATION

3.3 Wiring

Connect the antenna cable, the power cable
and the ground wire as shown below.
External Equipment
(NMEA)
NMEA
NMEA
DJ-1
DJ-1
POWER
POWER
12-24 VDC
12-24 VDC
1 3
2
DISPLAY UNIT
GROUND
Connect ground
wire to bolt fastened
(or welded) to hull.
* = Do not confuse the
antenna cable with the
transducer cable
for the Echo Sounder
(ex. LS-6100). The transducer
cable is black; the antenna
cable is white and "RADAR"
is written on the cable.
Wiring
ANTENNA UNIT
FUSE (5 A)
BLK (-)
WHT (+)
POWER SUPPLY
12/24 VDC
Connecting external equipment
A video sounder, navigator, plotter, wind
indicator or GPS receiver GP-310 (320B) can
be connected to the display unit. You will
need an NMEA cable to make the connection.
To connect two navigators, use the optional
cable MJ-A15A7F0004-005. Connect them
referring to the interconnection diagram at the
back of this manual.
Input sentences
NMEA 0183 Version 1.5/2.0/3.0, 4800 bps
Name
Ship's Speed VTG>RMC>RMA>VBW>VHW
Depth DPT>DBK>DBS>DBT
Heading (T)* HDT>HDG>VHW>HDM
Heading (M) HDM>HDG>VHW>HDT
Course (T) VTG>RMC>RMA
Course (M) VTG>RMC>RMA
Range/Bearing RMB>BWR>BWC
Waypoint RMB>BWR>BWC
Own Ship Pos. GGA>RMC>RMA>GLL
Time Diff. RMA>GLC>GTD
Water Temp. MTW
Time, Date ZDA>RMC
Wind Data MWV
Cross-track RMB>XTE
Error
*Requires magnetic variation (output by
navigator).
Output sentence
NMEA 0183 Version 3.0, 4800 bps
Name
Target L/L
26
Sentences
Sentence
TLL