General Safety Instructions; Scope Of Delivery - Bresser PM-100 Instruction Manual

General safety instructions

This device is not intended for use by individuals (including children) with
limited physical, sensory or mental capabilities or those lacking in experience
and/or knowledge, unless they are supervised by an individual responsible
for their safety or have received instructions from them regarding the use of
the device.
Children must be supervised to ensure that they do not play with the device.
RISK OF BLINDNESS
Never use this device to look directly at the sun or in the direct proxi-
mity of the sun!
CHOKING HAZARD
• Keep packaging material, like plastic bags and rubber bands, out of the
reach of children!
• This product contains small parts that could be swallowed by children!
RISK OF FIRE
Do not place the device, particularly the lenses, in direct sunlight. The con-
centration of light could cause a fire.

Scope of delivery

Polar finder scope with illuminated recticle
Additionally needed tools (not included):
Hex key 8mm and Phillips screwdriver
Illumination
Before you can switch on the illuminator (1, Fig. 1), you have to remove the
battery strip. Unscrew the cap with the knurling (2, Fig. 1). Remove the secu-
rity strip and screw the cap back on. Locate the ON/OFF switch on the upper
end of the illuminator (3, Fig. 1). It also enables you to adjust the brightness.
Focussing the polar finderscope
Focussing can be done before the installation of the finder scope. Look
through the scope at an object that is at least 100m away. If the image is not
sharp, look through the scope while turning the eyepiece (5, Fig. 1) until the
image is sharp.
5