Black & Decker Crisp n Bake TOD6020BC Use And Care Manual page 14

3. Close the door and press the steam clean button. This will illuminate the steam
clean icon and change the display to show "SC".
4. Press the start/stop button to begin the steam clean cycle. The display will cycle
between showing the time remaining and "SC".
5. The steam clean cycle runs for 5 minutes. This includes time for the oven to cool
down. Once the cycle is complete, the oven will beep twice and the display will
show "0.00".
6. Open the oven door and use a towel, paper towel, or sponge to wipe down the
interior surfaces and glass door. For best results wipe down right after the cycle
as condensation helps the cleaning. If significant time has passed and water
condensation is no longer visible on glass door or walls, re-run the cycle for best
cleaning results.
7. There will be some residual water left on the tray. When wiping the back of the
oven or sides, use caution as the oven may be warm.
8. After you have wiped down the oven, use oven mitts or towel to carefully
remove the crumb/steam tray and bring it to the sink. Empty the residual water
from the tray and rinse off the crumb tray. The tray may require some additional
scrubbing to remove any stubborn baked-on food. You can also place the crumb
tray in the dishwasher if desired.
Note: Use steam cleaning setting for cleaning only. This setting is not
designed to steam cook foods.
Note: Make sure soap is added to the water. Using soap ensures the proper
condensation of water.
Note: For very stubborn baked-on food or grease, see the "Deep Cleaning
Your Oven" section below.
9. Wipe the outside of the oven with a damp cloth or sponge. Do not use a spray
cleaner. Dry thoroughly.
10. Do not attempt to clean the heating elements. Any food that comes into
contact with the elements will burn off on its own.
D E E P C L E A N I N G Y O U R O V E N
After using your oven for an extended period of time, it may be necessary to
deep clean your oven to remove baked-on stains, or grease.
1. Ensure the crumb tray is in place but other accessories are removed.
2. Create a mixture of 3 parts baking soda and 1 part water. This will create a baking
soda cleaning paste, but it should not be too thick
3. Apply some of the paste to a paper towel, sponge or nylon pad.
4. Scrub the stained areas with the baking soda paste with medium pressure.
Continue scrubbing until the surfaces are clean.
5. Using a moist sponge, wipe away the remaining soda paste. Clean up any baking
soda paste that may have fallen onto the crumb tray during the cleaning process.
14
TOD6020BC_29094_EF_IB_B.indd 14 TOD6020BC_29094_EF_IB_B.indd 14 12/16/21 5:03 PM 12/16/21 5:03 PM