Cursor; Turning On The Cursor, Shifting The Cursor; Moving The Cursor To The Center Of The Screen - Furuno GP-7000 Operator's Manual

2.2

Cursor

2.2.1

Turning on the cursor, shifting the cursor

Press the cursor pad to turn the cursor on, and the cursor appears at the own
ship's position. Operate the cursor pad to shift the cursor. The cursor moves in
the direction of the arrow or diagonal pressed on the cursor pad.
Cursor state determines what data is shown in the NAVDATA window. This
window can be enabled or disabled by pressing the NAVDATA ON/NAVDATA
OFF soft key.
Also, when the cursor is placed on own ship's position, its data is shown as
follows.
2.2.2

Moving the cursor to the center of the screen

Press the CENTER soft key to return the cursor to the screen center.
NAVDATA window
FIX
33 37.125N
118 48.428W
SOG kts COG
1.00 007
Own ship's position data window
2. PLOTTER DISPLAY
3D
M
2-3