After pressing the ESC icon, the screen above
6
.
is next. Turn the silver knob to move the cursor to
"SERVICE" and press O.K.
8
.
Rotate the knob to "IO BOARD TEST"
and press O.K.
10.
This screen shows all the outputs
that can be activated indivigully.
7
.
Enter the service code of
"7378" and press O.K.
Press the "OUTPUTS" icon.
9.
11.
To select one just press on the screen at
the icon displayed. The selection will turn a
different color. Make sure that all are turned
off before exiting the service mode.
49