Procedure For Replacing The Pick Roller Unit - Fujitsu M3091DC Operation Manual

4.4.3 Procedure for Replacing the Pick Roller Unit

Replace the pick roller unit through the following procedure:
1) Remove any documents from the document support.
2) Open the automatic document feeder by pulling it toward you while
3) Remove the document support.
4) Remove the pick roller unit.
M3091DC Image Scanner Operation Guide
raising the cover open lever.
Press the paw of the pick roller unit inward, hold the knob, and raise
the pick roller unit while turning it (in the arrow direction).
Check that the pad unit is mounted completely.
If the pad unit is not mounted correctly, a
document feeding error such as a paper jam
may occur.
4-9