Table of Contents
Advertisement
®
Red Hat
Enterprise Linux OS 5.x
To load the LSI MegaRAID controller driver when installing Red Hat
At the boot: , type linux dd then press <Enter>.
2.
- To install or upgrade in graphical mode, press the <ENTER> key.
- To install or upgrade in text mode, type: linux text <ENTER>.
- Use the function keys listed below for more information.
[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]
boot: linux dd
Select Yes using the <Tab> key when asked if you have the driver disk, then press
3.
<Enter>.
Main Menu
Do you have a driver disk?
Yes
4.
Insert the Red Hat
OK, then press <Enter>.
Insert Driver Disk
Insert your driver disk into /dev/fd0
and press "OK" to continue.
The drivers for the RAID card are installed to the system.
Z10PA-D8 Series
®
OS installation CD.
No
®
OK
Back
®
Enterprise OS:
6-5
Advertisement
Table of Contents
