Table of Contents
Advertisement
SEL Components [Enabled]
Allows you to enable or disable all features of system Event Logging during boot.
Erase SEL [No]
Allows you to choose options for erasing SEL.
When SEL is Full [Do Nothing]
Allows you to choose options for reactions to a full SEL.
Log EFI Status Codes [Error code]
Bmc self test log
This item allows the system to log the report returned by BMC self test command.
Erase log [Erase, On every reset]
This item erases the log options.
When log is full [Clear log]
This item allows you to clear logs when it is full.
Bmc network configuration
Configuration Address source DM_LAN1/LAN1 [Previous State]
BIOS phase.
4-36
SEL Components
Chapter 4: BIOS setup
Advertisement
Table of Contents
