Table of Contents
Advertisement
6.1
RAID driver installation
After creating the RAID sets for your server system, you are now ready to install an
operating system to the independent hard disk drive or bootable array. This part provides the
instructions on how to install the RAID controller drivers during OS installation.
6.1.1
Creating a RAID driver disk
creating a SATA RAID driver disk.
priority of the SATA optical disk drive has to be manually adjusted. Otherwise, the system
will not boot from the connected SATA ODD.
RAID driver disk in DOS (using the Makedisk application in the support DVD).
To create a RAID driver disk in DOS environment
1.
Place the motherboard support DVD in the optical drive.
4.
Restart the computer.
From the Create Driver Diskette Menu, use the arrow keys to select a sub-menu. To
5.
create the RAID driver disk, select C610 INTEL RAID Driver then press <Enter>.
Create Driver Diskette Menu
C610 INTEL RAID Driver
Write DMI
FreeDOS command prompt
7.
Press <Enter>.
8.
Follow screen instructions to create the driver disk.
6-2
®
XP / Server 2003 or
Chapter 6: Driver installation
Advertisement
Table of Contents
