Attaching The Base (For One M522 Module); Attaching The Base (For Two M522 Modules) - Nortel M522 Manual

Procedure 4-1
How to install the M522 (continued)
Step Action
9 If you are connecting one M522 add-on module, position the
wedge-shaped base as shown in Figure 4-4. If you are connecting
two M522 add-on modules, position the base as shown in Figure
4-5. Align the plastic tabs in the base with the notches provided
on the M522 and telephone set.
Figure 4-4

Attaching the base (for one M522 module)

M522(1)
Figure 4-5

Attaching the base (for two M522 modules)

M522(2)
B
M5216/M5316
B
M522(1)
—continued—
297–2011–208 02.01 Standard February 1999
Installation 4-5
B
B
M5216/M5316