Advanced Features Playback; D Advanced Playback - FujiFilm 1400 Owner's Manual

C MANUAL MODE
5
When you have finished selecting the settings,
press the "MENU/ EXE" button to confirm the
settings. These settings are retained even when
the camera is switched off.
!
If you take the batteries out of the camera for a long
period or remove the batteries during setup, the
camera settings may all revert to the factory default
44
values.
6
Press the shutter button to take the picture.
The photographed image appears on the
LCD monitor.
To record the image, press the "MENU/ EXE"
button.
!
If you are not satisfied with the resulting image,
press the "CANCEL / BACK" button to prevent the
image being recorded on the SmartMedia. Then take
the picture again.
4
Advanced

D ADVANCED PLAYBACK

Features Playback
This section introduces a range of functions that
you can access when the Mode switch is set to
D
" ". The explanations below all presuppose
D
that the Mode switch is set to " ".
!
If your SmartMedia holds more than 1,000 recorded
frames, refer to page 14.
DC IN 5V socket
If there is a power socket handy, use the special
AC Power Adapter AC-5V (sold separately) so
there is no need to worry about the batteries
running out during playback ( P.13, 72).
!
The shapes of the plug and socket-outlet depends
on the country of use.
4
45