JJC JM-II Series Product User Manual
Hide thumbs Also See for JM-II Series:

Advertisement

Quick Links

Model: JM-II
Wireless Remote Controller
Product User Manual
Thank you for purchasing JJC JM-II series wireless remote controller. For the best
performance, please read this instruction carefully before using. You must read it
thoroughly and fully understand this manual to avoid improper operation which may result
in damage to the product.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JM-II Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for JJC JM-II Series

  • Page 1 Wireless Remote Controller Product User Manual Thank you for purchasing JJC JM-II series wireless remote controller. For the best performance, please read this instruction carefully before using. You must read it thoroughly and fully understand this manual to avoid improper operation which may result...
  • Page 2: Package Contains

    JJC JM-II Series Radio Frequency Wireless Shutter is designed for most DSLR and SLR cameras that have a remote socket on the camera body. The system works at 433MHZ frequency and has 16 available channels. What’s more, this wireless remote system adopts a technology to allow the transmitter to trigger the receiver without direct line of sight up to 30 meters.
  • Page 3 Identifying the Transmitter and Receiver ⚫ Transmitter ①Status LED ②Shutter button ③Mode dial ④Antenna head (can be pull out) ⑤Channel setting switch ⑥Battery cover ⚫ Receiver ① Left status LED ② Right status LED ③ Shutter button ④ Battery cover ⑤...
  • Page 4: Replace Batteries

    ① ON/OFF switch ② Remote socket Replace Batteries Tear off the plastic protector of the batteries if your batteries have. Then just slide to remove the covers toward the direction of the arrow sign on the battery covers . Insert the fresh battery, please ensure the batteries are put into a correct direction. Do not install batteries in the reverse direction as this could cause the batteries to leak corrosive liquids, generate heat or explode.
  • Page 5 Attaching the Set to a Camera Turn OFF the camera before attaching the receiver to camera. Please make sure the transmitter and receiver are at the same code setting. There are 16 channels available. Slide the receiver gently into your camera hot shoe as the picture shown below. Then rotate the hot shoe lock nut clockwise to tight the receiver on your camera hot shoe.
  • Page 6 Note: Please remember not to connect the cable round the wrong way. For any JJC connecting cord , please always keep in mind that the end as the picture shown left should be plugged to receiver while the other end is for the camera remote socket.
  • Page 7 5s Delay shot Single shooting 3 continuous shots Single shooting...
  • Page 8: Single Shot

    ⚫ Single shot Shift mode dial to single shot section while select the camera to single shot mode. Half press the shutter button of transmitter to focus. 2. Then fully press the shutter button, the camera will take a picture instantly. ⚫...
  • Page 9 Then fully press while holding the shutter button of transmitter until the transmitter LED light OFF, and the receiver will now lock the shutter for continuous shot. To release the shutter lock, press the shutter button of the transmitter again, and the receiver will unlock the shutter.
  • Page 10 Then fully press while holding the shutter button of transmitter until the transmitter LED light OFF, and the receiver will now lock the shutter for BULB. To release the shutter lock, press the shutter button of the transmitter again, and the receiver will unlock the shutter.
  • Page 11: Continuous Shots

    Then fully press the shutter button, and the camera will take a picture after 5 seconds count down. You will get a delay shot photo. ⚫ 3 continuous shots Shift the mode dial of the transmitter to 3 continuous shot section while select the camera to single shot mode.
  • Page 12 Product specifications and external appearance are subject to change without notice. ONE YEAR GUARANTEE If for quality factor, this JJC product fails within ONE YEAR of the date of purchase, return this product to your JJC dealer or contact service@jjc.cc and it will be exchanged for you at no charge (not including shipping cost).
  • Page 13: Fcc Statement

    Website: www.jjc.cc Email: sales@jjc.cc / service@jjc.cc Address: RM1305 East Block, Tian’an High-Tech Plaza Phase II, Tian’an Cyber Park, Futian District, Shenzhen, Guangdong, China FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

Table of Contents