Yamaha XRS900 Series Owner's Manual page 82

Periodic maintenance and adjustment
1
1
2
2
3
4
5
1. Starter relay cover
2. Fuel injection system fuse
3. Fuel injection system spare fuse
6
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off
7
the electrical circuit in question.
2. Remove the blown fuse, and then
8
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
9
rating than recommended to
avoid causing extensive dam-
10
age to the electrical system and
possibly a fire.
11
12
Specified fuses:
3
Main fuse:
Headlight fuse:
Signaling system fuse:
Ignition fuse:
Parking lighting fuse:
Radiator fan motor fuse:
ABS motor fuse:
ABS solenoid fuse:
Fuel injection system fuse:
ABS control unit fuse:
Backup fuse:
Electronic throttle valve fuse:
Auxiliary fuse 1:
[EWA15132]
3. Turn the key to "ON" and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
50.0 A
15.0 A
7.5 A
15.0 A
7.5 A
15.0 A
30.0 A
15.0 A
10.0 A
7.5 A
7.5 A
7.5 A
2.0 A
6-32
check the electrical system.