Diagnostics Connection - Mercedes-Benz S-Class 2020 Owner's Manual

32
General notes
D) A 639 580 03 18
E) A 910 580 00 00
F) A 293 580 00 00
Year of manufacture: 2020
Complies with all relevant provisions
Directive No. 2006/42/EC
b)
Description and purpose of use:
Car jack is intended solely for lifting of the con‐
crete car, in accordance with the instruction
label on the car jack.
3.
References of harmonized and other standards
or specifications
ISO 4063, EN ISO 14341-A, AS 2693, DBL
8230.10, DBL 7382.20, DBL 7392.10, DBL
8451.15, MBN 10435,
Technical documentation of the product is
stored at the premise of the manufacturer. The
person responsible for assembling the technical
documentation of the product: Head of the Tech‐
nical Department Brano a.s.
4.
Hradec nad Moravicí
Place
5.
11/5/2020
Date
Engineer Petr Wozniak
[Signature]
Director of Quality
TIREFIT kit
Copy and translation of the original declaration
of conformity:
EC declaration of conformity
In accordance with EC Directive 2006/42/EC
We hereby declare that the product
Product designation: Daimler electric air pump
Model designation: 0872, DT/UW 200077 - IBK-
LK2P
MB part no.: A 000 583 9204
complies with the following relevant regulations:
2014/30/EU
Applied harmonised standards, in particular:
DIN EN 55014-1: 2017
DIN EN 55014-2: 2015
Manufacturer: Dunlop Tech GmbH
Address: Offenbacher Landstrasse. 8, 63456
Hanau
Authorised representative: IMS dept.
Date: March 2020
Signature: IMS-AE, IMS-AE-L

Diagnostics connection

The diagnostics connection is a technical inter‐
face in the vehicle. It is used, for example, within
the scope of repair and maintenance work or for
reading out vehicle data by a specialist work‐
shop. Diagnostic devices should therefore only
be connected by a qualified specialist workshop.