Owner's Manual; Touch-Sensitive Controls - Mercedes-Benz S-Class 2020 Owner's Manual

Always specify the vehicle identification number
(VIN) ( page 489) when ordering Mercedes-
/
Benz GenuineParts.

Owner's Manual

This Owner's Manual describes all models and
all standard and optional equipment available for
your vehicle at the time of this Owner's Manual
going to press. Country-specific differences are
possible. Note that your vehicle may not be fit‐
ted with all features described. This is also the
case for systems and functions relevant to
safety. Therefore, the equipment on your vehicle
may differ from that in the descriptions and illus‐
trations.
The original purchase agreement for your vehicle
contains a list of all of the systems in your vehi‐
cle.
Should you have any questions concerning
equipment and operation, please consult a
Mercedes-Benz Service Centre.
The Owner's Manual and Service Booklet are
important documents and should be kept in the
vehicle.

Touch-sensitive controls

In addition to conventional switches and but‐
tons, your vehicle is equipped with touch-sensi‐
tive controls.
These are located in the following areas of your
vehicle:
Roof and door control panel
R
Climate control
R
Steering wheel
R
MBUX multimedia system
R
The controls have touch-sensitive user interface
surfaces. The surfaces are controlled by press‐
ing or swiping to adjust settings or to trigger
functions, for example.
In the area of the touchscreen, you also receive
haptic feedback in the form of a pulse or a vibra‐
tion, or the surface structure changes on the
touch-sensitive user interface surface, for exam‐
ple.
General notes
You receive haptic feedback in the following sit‐
uations, for example:
When pressing a button on the user interface
R
surface
When scrolling in a list or table
R
When reaching a new area on the user inter‐
R
face surface, e.g. a pop-up window
When handling touch-sensitive user interface
surfaces, observe the following points to avoid
problems operating:
Do not affix stickers or similar objects on the
R
surfaces.
Keep the surfaces protected from moisture
R
and wet conditions.
Keep the surfaces free of dust and dirt.
R
Some touch-sensitive control elements have a
symbol and integrated indicator lamps. When
operating, make sure to press on the symbol of
the control element.
23