Easy Entry And Exit Feature - Mercedes-Benz S-Class 2020 Owner's Manual

Hide thumbs Also See for S-Class 2020:
Table of Contents

Advertisement

136 Seats and stowing

Easy entry and exit feature

Using the easy entry and exit feature
& WARNING Risk of accident when pulling
away during the adjustment process for
the easy exit feature
You could lose control of the vehicle.
Always wait until the adjustment proc‐
#
ess is complete before pulling away.
& WARNING Risk of becoming trapped
during adjustment of the easy entry and
exit feature
You and other vehicle occupants could
become trapped.
Ensure that no one has a body part in
#
the sweep of the seat or steering wheel.
Move the adjustment lever of the steer‐
#
ing wheel if there is a risk of becoming
trapped by the steering wheel.
The adjustment process is stopped.
If there is a risk of becoming trapped by
#
the driver's seat, press the seat adjust‐
ment switches.
The adjustment process is stopped.
You can stop the adjustment process by press‐
ing one of the memory function position
switches.
& WARNING Risk of becoming trapped if
children activate the easy entry and exit
feature‑
Children could become trapped if they acti‐
vate the easy entry‑ and exit feature, particu‐
larly when unattended.
Never leave children unattended in the
#
vehicle.
When leaving the vehicle, always take
#
the key with you and lock the vehicle.
In order to use the easy entry and exit feature,
the automatic seat adjustment function must
have been switched on (
page 130).
/
If the easy entry and exit feature is active, the
steering wheel will move upwards and the driv‐
er's seat will move back in the following situa‐
tions:
you switch the ignition off with the driver's
R
door open
you open the driver's door with the ignition
R
switched off
%
The steering wheel will then move upwards
only if it is not already as high as it will go.
The driver's seat will then move backwards
only if it is not already at the rear of the seat
adjustment range.
The steering wheel and the driver's seat will
move back to the last drive position in the fol‐
lowing cases:
you switch the power supply or the ignition
R
on when the driver's door is closed
you close the driver's door with the ignition
R
switched on
The last drive position will be saved when:
you switch the ignition off.
R

Advertisement

Table of Contents
loading

Table of Contents