FUJICA AX-3 Owner's Manual page 5

1. ATTACHING THE STRAP AND PUTTING THE CAMERA IN IT'S CASE
2. MOUNTING AND DISMOUNTING THE LENS
Position the red dot on the lens rear opposite the red dot on the Lens
Mount, then push the Lens in and turn it 65ø to the right (clockwise). It
will lock into position with a click.
While pressing in the Lens Lock toward the camera body, turn the Lens to
the left (counter-clockwise) as far as it will go, then pull it out toward
the front.
Using the Rubber Lens Hood
When shooting against the light, fit the accessory Rubber Lens Hood on to
the lens to prevent flare and ghost caused by the light falling directly
on the lens surface.