FUJICA AX-3 Owner's Manual page 11

6. While watching the Exposure Counter, wind the film with the Film
Advance Lever and press down the Shutter Release. Repeat until the second
white dot from the letter "S" (first white dot from the red "O") appears
in the center of the Exposure Counter. The film has now been positioned
for the first shot.
* The film is advancing properly if the Film Rewind Knob turns while the
Film Advance Lever is winding.
* The white dots between the numbers in the Exposure Counter represent odd
numbers.
* You can position the film faster by setting the Shutter Speed Selector
to 1000 because the shutter will trip faster.
7. Film identification The Film Confirmation Window in the camera back
will tell you at a glance whether there is film in the camera or not. If
you have Fuji film in your camera, it will also tell you the film type and
the number or exposures it will yield.
The procedure is the same as that described in (j) to A). To wind the
film, close the Camera Back, switch the auto winder switch to SINGLE or
CONT. and press down the Shutter Release.
* If the film does not advance, turn off the auto winder and switch it
once again to SINGLE or CONT.