Viewfinder Information - FUJICA AX-3 Owner's Manual

Notes: 1. Remember, your Fujica AX-3 has a built-in "memory lock," that
is, the shutter speed obtained by depressing the Shutter Release halfway
down will remain locked and the LED indicator in the Viewfinder will not
change position until you take your finger off the Shutter Release even if
there are changes in subject brightness and aperture value {refer to the
paragraph entitled "AK lock" on page 29).
2. To switch from AE or AEL to the other settings, turn the Shutter Speed
Selector while pressing in the Shutter Speed Selector Lock. (You cannot
turn it unless the Lock is in depressed position).

2. VIEWFINDER INFORMATION

The information provided in the Viewfinder of your AX-3 is as follows:
Note: Your Fijica AX-3 uses a fully automatic electronic shutter. The
shutter speed indicated in the viewfinder represents an approximate value.