Before Setting Oven Controls - Electrolux Electric Range Coil Surface Elements with or without Clock Use & Care Manual

Removing & Replacing Oven Racks
To remove, pull the rack forward until it stops. Lift up front of rack and slide out. To replace, fit the rack onto the guides on
the oven walls. Tilt the front of the rack upward and slide the rack back into place.
Setting Clock & Minute Timer (some models)
To Set the 3 Button Minute Timer1. Slide switch To Set the 3 Button Clock (some models)When the range is first plugged in, or when the power supply to C (CLOCK/TIMER) to the TIMER position, "0:59" (596MINUTES) will appear in the display window. The timer

Before Setting Oven Controls

Oven Vent Location
For models equipped with coiled surface elements, the oven vent is located under
the left rear surface element. When the oven is on, warm air flows through the
left rear element. This venting is necessary for proper air circulation in the oven
and good baking results. DO NOT BLOCK THE OVEN VENT.
Arranging Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO
OPERATING THE OVEN). Always use oven mitts when using the oven.
5