Datalogic LT-510 Quick Start Manual

LT-510 MINI DOME
LIGHTING SYSTEM
FOR MATRIX FAMILY READERS
DESCRIPTION
The LT-510 Mini Dome Lighting System is a diffuse mini dome light
designed for reading printed label or Direct Marking codes on small
parts with a curved or specular surface.
MECHANICAL DIMENSIONS
mm
[inch]
MOUNTING Matrix-1000/2000™
The following parts are required for mounting:
LT-510 Mini Dome Lighting System
BK-510 Mini Dome Lighting System Bracket
C
A
1. Mount the bracket A onto the LT-510 illuminator B using the 4
M4x8 chamfered screws in the bracket package.
2. Mount the reader C onto the illuminator assembly through the
positioning slots on the bracket. Use the 4 M4x6 screws in the
bracket package.
3. Wire the LT-510 to the CBX according to the wiring table on the
opposite page.
4. Position the Matrix assembly over the code reading area at the
correct Focus Distance for your model, (described in the Matrix
Reference Manual under "Reading Features").
POSITIONING Matrix-1000/2000™
Focus distance = α + β
The best results for this illuminator are obtained when α is
approximately 13 mm (0.5"). The positioning slots on the brackets allow
adjustment to obtain the best results between the reader optimal focus
distance and the illuminator optimal working distance. You can
maximize the reading performance through VisiSet™.
B
45 mm
code surface