READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with
the various pad functions of the oven as described below.
to set the
time of day.
Used to select a
shorter 2 hour Self-
Clean cycle time.
Used to select a longer
3 hour Self-Clean
TIMER ON/OFF PAD—
Used to set or cancel the
PAD— Used to set
minute timer. The minute
the desired start
timer does not start or stop
time for baking &
Self-Clean. May be
TIMER ON/OFF pad is used
used with BAKE
to set the Continuous Bake
TIME to program a
delayed bake cycle.
*Note: The OVEN indicator light on the electronic display
will turn ON and OFF when using the Bake feature and
during preheat. This is normal and indicates that the oven is
cycling to maintain the selected baking temperature. When
the preheat indicator light turns OFF, your oven is ready.
For a silent control panel
When choosing a function, a beep will be heard each time a
pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold
the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press
again for 7 seconds until the control beeps
The electronic oven control is set to operate in °F
To Set the Clock
When the range is first plugged in, or when the power
supply to the range has been interrupted, the display will
once (do not hold pad down).
Oven Control Functions
UP and DOWN ARROW PADS— Used along
PAD— Used to
with the function pads to select oven
enter the length of
temperature, cook time, start time (when
the baking time.
programming an automatic start time), time of
day, clean time and minute timer.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated.
. After 7 seconds,
Setting Oven Controls
Note: The time of day must first be set in order to operate the oven.
(Fahrenheit) when shipped from the factory. The oven can
be programmed for any temperature from 170°F to 550°F
(77°C to 287°C).
To change the temperature to °C (Celsius) or from °C
to °F (control should not be in a Bake or Clean mode):
. "— —" appears in the display.
2. Press and hold the
3. Press and hold
4. Press the
5. Press any control pad to return to normal operating
2. Within 5 seconds, press and hold the
the correct time of day appears in the display.
Note: The clock cannot be changed during any timed
bake or Self-Clean cycle.
to select the bake
LIGHTS— These light to
show which feature is in
BROIL PAD— Used to
select the variable broil
OVEN LIGHT PAD—
Used to turn the interior
oven light ON or OFF.
CLEAR/OFF PAD— Used
to clear any function
except the time of day
and minute timer. Press
CLEAR/OFF to stop
cooking. Also the CLEAR/
OFF pad is used to
activate oven door
until "HI" appears in the
until °F or °C appears in the
to change °F to °C or °C to °F.