Unit Of Measurement - VESPA Primavera 125 Manual

Vespa Primavera 125 i.e. - 150 i.e. 3V ABS (i-get 2016)
Pre-delivery
Engine
- Check throttle control travel
Others
- Check documentation
- Check the chassis and engine numbers
- Tool kit
- Licence plate fitting
- Locks checking
- Tyre pressure check
- Fitting of mirrors and possible accessories
Instruments start-up

UNIT OF MEASUREMENT

It is possible to change the unit of measure (from
km to miles) following the procedure below:
- move the key to «OFF»;
- press the MODE key;
- Holding in the MODE button, turn the key to the
«ON» position;
- after about 2 seconds release the MODE button.
N.B.
THE FOLLOWING ARE DEFINED WHEN NAVIGATING THE
DISPLAY:
- «BRIEF PRESS»: A PRESS OF THE INDICATED BUTTON,
FOR A PERIOD OF LESS THAN TWO SECONDS;
- «PROLONGED PRESS»: A PRESS OF THE INDICATED
BUTTON, FOR A PERIOD OF MORE THAN TWO SECONDS.
FOR "S" VERSION
With "SETTINGS" mode highlighted on the digital
display, press and hold the MODE selector to the
right to access the following menu options:
CONFIGURATION
•
Clock
•
Units of measurement: speed, temper-
ature, exit
•
Pairing configuration
•
Exit
Press the CENTRE button of the mode selector
briefly to select the parameter:
PRE DE - 10