Applicable Versions - VESPA Primavera 125 Manual

Vespa Primavera 125 i.e. - 150 i.e. 3V ABS (i-get 2016)
Maintenance
2. Turn on the headlight and check that the boun-
dary of the light beam projected onto the screen is
not higher than 9/10 or lower than 7/10 of the dis-
tance between the centre of the headlight and the
ground;
3. Otherwise, adjust the right headlight with screw
«A».
N.B.
THE PROCEDURE DESCRIBED IS THAT ESTABLISHED
BY EUROPEAN STANDARDS FOR THE MAXIMUM AND
MINIMUM HEIGHT OF THE LIGHT BEAM. REFER TO THE
STATUTORY REGULATIONS IN FORCE IN EVERY COUN-
TRY WHERE THE VEHICLE IS USED.
Anti-evaporation system
N.B.

APPLICABLE VERSIONS

The vehicle is equipped with the "Canister", main component of the system for the control of evaporative
emissions, compliant with the current standards.
A. Fuel pump
B. Fuel tank
C. Two-way fuel vapour ventilation valve
D.Canister
E.Air purge pipe into atmosphere
F.One-way electronic fuel vapour purge control
valve (controlled by ECU)
G. Vacuum fitting
H. Throttle body
I. Air induction fitting
L. Injector
MAIN - 60