Emerson RTM-ATCA-F125 Installation And Use Instruction page 24

Hardware Preparation and Installation
3. Ensure that the top and bottom ejector handles on the RTM are in the outward position by
squeezing the lever and the latch together.
4. Insert the RTM into the shelf by placing the top and bottom edges of the RTM in the card
guides of the shelf. Ensure that the guiding module of the front blade and RTM are aligned
properly.
5. Apply equal and steady pressure to the RTM to carefully slide the RTM into the shelf until
you feel resistance. Continue to gently push the RTM until the connectors engage.
6. Squeeze the lever and the latch together and hook the lower and the upper handle into the
shelf rail recesses
26
RTM-ATCA-F125 Installation and Use (6806800K30C)